В теме одно сообщение

[goddog]

стойка syntec 60W-E

 

при работе появляется в ненужный момент 69 ошибка

 

Motion69 Y2 Axis Feedback of axis is anomalous. 

 

как устранить?

исчезает только после перезагрузки станка но не надолго

 

 

 

[mihams]

Description:

If the difference between the axial feedback value exceeds 4 times of the maximum speed set by the 

controller, the number of abnormal times will be accumulated by 1 each time. This alarm will be 

issued when two consecutive abnormalities occur;

The maximum speed is the maximum value among Pr461 ~, Pr521 ~, Pr621 ~, Pr821 ~, Pr1801 

~(when using as servo spindle).

 

Possible Cause:

1 - Communication between controller and driver is abnormal. 

2 - The following parameter settings are inappropriate;

    Pr461~Pr480 Maximum feed rate for axial rapid movement (G00)

    Pr521~Pr540 Axial JOG speed

    Pr621~Pr640 Axial maximum cutting feedrate

    Pr821~Pr840 Axial homing feedrate

3 - If using servo spindle, Pr1801~Pr1810 Spindle maximum speed setting is inappropriate