;
; Busellato Easy Jet 7.20
; Xilog Plus
; ArtCAM 2018
; XXL output
;
DESCRIPTION = "SCM_Xilog_Busellato_mm (*.xxl)"
FILE_EXTENSION = "xxl"
UNITS = MM
END_OF_LINE = "[13][10]"
;
; Formatting
;
FORMAT = [N|@|N|1.0]
FORMAT = [X|@|X=|1.3]
FORMAT = [Y|@|Y=|1.3]
FORMAT = [Z|@|Z=|1.3|-1.0]
FORMAT = [I|@|I=|1.3]
FORMAT = [J|@|J=|1.3]
FORMAT = [S|@|S=|1.0]
FORMAT = [T|@|T=|1.0]
; Feed rate
FORMAT = [F|@|V=|1.0]
; Home tool positions
FORMAT = [XH|@|X=|1.3]
FORMAT = [YH|@|Y=|1.3]
FORMAT = [ZH|@|Z=|1.3]
; Safe Z
FORMAT = [SZ|#|=|1.0]
;
; Program header
;
START = "H DX=[XMAX] DY=[YMAX] DZ=[ZMATERIAL] -EF C=0 T=0 R=1 *MM /def BX=0.000 BY=0.000 BZ=0.000 V=0"
START = ";**********************************************************"
START = "REF DX=[XSIZE] DY=[YSIZE] DZ=[ZMATERIAL] FLD=EF BX=0.000 BY=0.000 BZ=0.000"
START = ";**********************************************************"
START = ";**********************************************************"
START = "F=1"
START = "O X=0.000 Y=0.000 Z=0.000 F=1 ;ChangePlane"
START = "SET ZFAST[SZ]"
; Rapid move
;
FIRST_RAPID_RATE_MOVE = "XG0 [X] [Y] Z[SZ] [T] P=0 D[SZ] C=1 [S] s=0"
RAPID_RATE_MOVE = "XPP [X] [Y] [Z]"
PLUNGE_RATE_MOVE = "XL2P [X] [Y] [Z] [F]"
RETRACT_MOVE = ""
;
;
; Linear machining
;
FIRST_FEED_RATE_MOVE = "XL2P [X] [Y] [Z] [F]"
FEED_RATE_MOVE = "XL2P [X] [Y] [Z] [F]"
;
; Clockwise arc
;
FIRST_CW_ARC_MOVE = "XA2P [X] [Y] [Z] [I] [J] G=2 [F]"
CW_ARC_MOVE = "XA2P [X] [Y] [Z] [I] [J] G=2"
;
; Counter-clockwise arc
;
FIRST_CCW_ARC_MOVE = "XA2P [X] [Y] [Z] [I] [J] G=3 [F]"
CCW_ARC_MOVE = "XA2P [X] [Y] [Z] [I] [J] G=3"
;
; End
;
END = ";**********************************************************"
END = ".END"
END = ";**********************************************************"
END = ";FINEPROG"
